Executing tuning:
eMMC: 0x2c [CLOCK_CONTROL] => 0x7: SYSCLK_EN: 1 | SYSCLK_STABLE: 1 | SDCLK_EN: 1 | PRG_CLK_MODE: 0 | SD_CLK_DIV[9:8]: 0 | SD_CLK_DIV: 0
eMMC: 0x28 [HOST_CONTROL] => 0x34: LED: OFF | TX_WIDTH: 1-BIT | HIGH_SPEED: 1 | ADMA2-32 | MMC_WIDTH: 8-BIT | CD_TEST_INS: 0 | CD_TEST_EN: 0
eMMC: 0x3e [HOST_CONTROL2] => 0x1b: UHS_MODE: SDR104 | 1.8V | DRIVE_STRENGTH: A | TUNING: 0 | SAMPLE_CLK: 0 | UHS-II: 0 | ADMA2_LEN: 16-BIT | CMD23_EN: 0 | V3.0 | ADDR_MODE: 32-BIT | ASYNC_INT_EN: 0 | AUTO_PRESENT_VAL: 0
eMMC: 0x3e [HOST_CONTROL2] <= 0x1b: UHS_MODE: SDR104 | 1.8V | DRIVE_STRENGTH: A | TUNING: 0 | SAMPLE_CLK: 0 | UHS-II: 0 | ADMA2_LEN: 16-BIT | CMD23_EN: 0 | V3.0 | ADDR_MODE: 32-BIT | ASYNC_INT_EN: 0 | AUTO_PRESENT_VAL: 0
Switching to 4 bit:
eMMC: 0x28 [HOST_CONTROL] <= 0x16: LED: OFF | TX_WIDTH: 4-BIT | HIGH_SPEED: 1 | ADMA2-32 | MMC_WIDTH: DAT_WIDTH | CD_TEST_INS: 0 | CD_TEST_EN: 0
Enabling vendor specific HW tuning:
eMMC: 0x110 [0x110] => 0x5d:
eMMC: 0x110 [0x110] <= 0x4d:
Start tuning:
eMMC: 0x3e [HOST_CONTROL2] => 0x1b: UHS_MODE: SDR104 | 1.8V | DRIVE_STRENGTH: A | TUNING: 0 | SAMPLE_CLK: 0 | UHS-II: 0 | ADMA2_LEN: 16-BIT | CMD23_EN: 0 | V3.0 | ADDR_MODE: 32-BIT | ASYNC_INT_EN: 0 | AUTO_PRESENT_VAL: 0
eMMC: 0x3e [HOST_CONTROL2] <= 0x5b: UHS_MODE: SDR104 | 1.8V | DRIVE_STRENGTH: A | TUNING: 1 | SAMPLE_CLK: 0 | UHS-II: 0 | ADMA2_LEN: 16-BIT | CMD23_EN: 0 | V3.0 | ADDR_MODE: 32-BIT | ASYNC_INT_EN: 0 | AUTO_PRESENT_VAL: 0
Sending tuning command:
eMMC: 0x30 [INT_STATUS] <= 0xffffffff: RESPONSE | DATA_END | BLK_GAP | DMA_END | SPACE_AVAIL | DATA_AVAIL | CARD_INSERT | CARD_REMOVE | CARD_INT | RETUNE | CQE | ERROR | TIMEOUT | CRC | END_BIT | INDEX | DATA_TIMEOUT | DATA_CRC | DATA_END_BIT | BUS_POWER | ACMD12ERR | ADMA_ERROR0xfc002e00
eMMC: 0x4 [BLOCK_SIZE] <= 0x7040: BLOCK_SIZE: 0x40 | DMA_BUF_BOUNDARY: 512K
eMMC: 0x6 [BLOCK_SIZE] <= 0x1: BLOCK_CNT: 1
eMMC: 0xc [TRANSFER_MODE] <= 0x10: DMA_EN: 0 | BLK_CNT_EN: 0 | AUTO_CMD: DISABLED | DATA_DIR: READ | MULTI_BLK: 0
eMMC: 0x8 [ARGUMENT] <= 0x0:
eMMC: 0xe [TRANSFER_MODE] <= 0x153a: RESP_TYPE: 48-BITS | CRC_CHECK_EN: 1 | CMD_IDX_CHECK_EN: 1 | DATA_PRESENT: 1 | CMD_TYPE: NORMAL | CMD: 0x15
Waiting for tuning command response:
eMMC: 0x30 [INT_STATUS] => 0x0: 0x0
eMMC: 0x30 [INT_STATUS] => 0x20: DATA_AVAIL
eMMC: 0x30 [INT_STATUS] <= 0x20: DATA_AVAIL
eMMC: 0x3e [HOST_CONTROL2] => 0xc8bf009b: UHS_MODE: SDR104 | 1.8V | DRIVE_STRENGTH: A | TUNING: 0 | SAMPLE_CLK: 1 | UHS-II: 0 | ADMA2_LEN: 16-BIT | CMD23_EN: 0 | V3.0 | ADDR_MODE: 32-BIT | ASYNC_INT_EN: 0 | AUTO_PRESENT_VAL: 0
Tuning complete!
eMMC: 0x2c [CLOCK_CONTROL] => 0x7: SYSCLK_EN: 1 | SYSCLK_STABLE: 1 | SDCLK_EN: 1 | PRG_CLK_MODE: 0 | SD_CLK_DIV[9:8]: 0 | SD_CLK_DIV: 0
eMMC: 0x28 [HOST_CONTROL] => 0x16: LED: OFF | TX_WIDTH: 4-BIT | HIGH_SPEED: 1 | ADMA2-32 | MMC_WIDTH: DAT_WIDTH | CD_TEST_INS: 0 | CD_TEST_EN: 0
eMMC: 0x3e [HOST_CONTROL2] => 0x9b: UHS_MODE: SDR104 | 1.8V | DRIVE_STRENGTH: A | TUNING: 0 | SAMPLE_CLK: 1 | UHS-II: 0 | ADMA2_LEN: 16-BIT | CMD23_EN: 0 | V3.0 | ADDR_MODE: 32-BIT | ASYNC_INT_EN: 0 | AUTO_PRESENT_VAL: 0
eMMC: 0x3e [HOST_CONTROL2] <= 0x9b: UHS_MODE: SDR104 | 1.8V | DRIVE_STRENGTH: A | TUNING: 0 | SAMPLE_CLK: 1 | UHS-II: 0 | ADMA2_LEN: 16-BIT | CMD23_EN: 0 | V3.0 | ADDR_MODE: 32-BIT | ASYNC_INT_EN: 0 | AUTO_PRESENT_VAL: 0
Switching to 8 bit:
eMMC: 0x28 [HOST_CONTROL] <= 0x34: LED: OFF | TX_WIDTH: 1-BIT | HIGH_SPEED: 1 | ADMA2-32 | MMC_WIDTH: 8-BIT | CD_TEST_INS: 0 | CD_TEST_EN: 0
eMMC: 0x110 [0x110] => 0x45: